2.5” Grayscale LCD Display Original Size OSD Menu Dot-by-dot Highlight Backlight LCD Kit Pre-cut Shell&Speaker For Game Boy DMG

Note: You need the cut shell case by yourself if you jusy buy only lcd kit!!!
Note: The glass lens has the logo!
Note: Same display style as original screen when backlight is off.

Important note: This LCD screen has a response time of 100ms, resulting in more noticeable ghosting than the original screen. The built-in backlight of this panel further accentuates the ghosting effect. If this issue bothers you, we recommend that you can buy our IPS LCD screen instead.

Description:

*2.5 inches grayscale screen. The same display size as the original screen.
*Same display effect as original screen when backlight is off.
*Built-in OSD Menu! Press the Knob 3 seconds to activate the OSD menu.
*10 Brightness levels.
*30 Contrast levels.
*Battery Level Display.
*Adjust brightness by scrolling the control wheel.

Installation tutorial and precautions:

1. Do not squeeze the LCD screen. Do not pull or tug on the LCD screen cable. Do not wipe the LCD screen.
2. Please test before installation.
3. Be careful not to insert the cable in the same direction at both ends. Starting up once will burn the LCD screen motherboard.

Packing including:   (Only LCD Kit. You need the cut shell case by yourself if you jusy buy only lcd kit!)

1x grayscale screen
1x PCB board with pre-soldered speaker
1x Bracket
1x ribbon cable
2x Screwdrivers

Or:   (LCD Kit with housing shell)

1x grayscale screen
1x PCB board with pre-soldered speaker
1x Bracket
1x ribbon cable
2x Screwdrivers
1x pre-cut shell with buttons

Note: You need the cut shell case by yourself if you jusy buy only lcd kit!!!

Instructions: