Note: The glas lens has the logo!!!
Note: You don’t need to cut the shell case.
Description:
1. 720×480 display resolution. HD IPS LCD. 9 pixels to 1 pixel.
2. Wide View angle up to 178 degree.
3. Drop in IPS LCD for GBA. No need to cut the shell case.
4. Same display size as the original LCD screen.
5. Built-in OSD Menu!
6. Retro pixel Effects: Normal, Retro pixel ( like original AGS-101 LCD ), Scanline 1 and Scanline 2.
7. 15 brightness levels.
8. 8 color modes.
9. FRM On/OFF function(Frame blending On/OFF) is included. For some extremly few games, the image effect will be better when the FRM function turns on. For most games, no need to turn on the FRM Function. The default FRM is OFF.
10. Touch Screen to change the brightness and the color modes.
11. Compatible 32 pin and 40 pin motherboard.
12. Add Desaturation. This function can make the color of IPS LCD images closer to the original color of GBA games. Note: ‘Desaturation’ can only be adjustable in normal color mode.
13. Touch Shourtcut ON/OFF. You can set ‘Touch Shourtcut’ OFF to avoid auto cycling colour modes and auto brightness changes.
You need to welding 3 wires to control the OSD Menu.
OSD Menu:
-Press the Select+L+R buttons for 1 second at the same time, then release your fingers to activate the OSD Menu.
-Press the Select button to select the adjustment item when OSD Menu activated.
-Press the L or R button to adjust the item when OSD Menu activated.
Note: You don’t need to do any welding if you don’t want the OSD menu!
Packing including: (Only LCD kit)
1x IPS LCD screen, 1x Adapter pcb, 1x Glass Screen lens, 1x Double-sided tape, 2x Screwdrivers, 2x Ribbion cables, 2x position sticks.
Or: (LCD kit with shell case)
1x IPS LCD screen, 1x Adapter pcb, 1x Glass Screen lens, 1x Double-sided tape, 2x Screwdrivers, 2x Ribbion cables, 2x position sticks, 1x Pre-cut Shell case, 1 set buttons, 1 set Rubber Pad, 1x Sticker label, 1 set screws
Instructions:
Reviews
There are no reviews yet.